SyntaxPilot
Courses/C++/Lesson 5

C++ · Lesson 5 of 40 · 17 min

if / else and switch

queued

These are the notes for C++ episode 5. Until now every program ran every line, top to bottom, no matter what. Here your program learns to decide: run some code only when something is true, and other code when it isn't. You will learn if, else, the three silent bugs that fool almost every beginner (= instead of ==, a semicolon after if (...), missing braces), else if ladders and why their order matters, combining conditions with && and ||, nested if, catching bad input with if (cin.fail()), the ternary operator ?:, and switch with case, break and default, including fall-through and why switch can't take a string. Every example below was compiled with g++ -O2 -std=c++17 main.cpp -o main (g++ 13.3, the same command as the SyntaxPilot compiler) and run with the input shown, using printf '<input>' | ./main.

Piped input is not echoed. When input comes from a pipe (or the SyntaxPilot input box), what you "typed" does not appear in the output. In a real terminal you would see it next to the cursor.

The problem: the free-chai offer

Raju runs a chai stall near the college. New offer: if your bill is over ₹200, the chai is free. Aman adds the offer to Raju's billing program like this:

#include <iostream>
#include <string>
using namespace std;

int main() {
    int bill;
    cin >> bill;
    cout << "Bill: " << bill << endl;
    cout << "Free chai!" << endl;
    return 0;
}

Input 120. Output:

Bill: 120
Free chai!

Wrong: a ₹120 bill gets free chai, and so does every other bill. Why? Every program so far runs every line, top to bottom. There is no way to say "only sometimes". The program needs to make a decision.

The fix: if

Raju asks himself one question: is the bill over ₹200? The answer is yes or no.

At the chai stall In C++
"Is the bill over ₹200?" (yes / no) the condition (bill > 200), which is true or false
Yes: hand over a free chai, only then if (bill > 200) { ... }: the block runs only if the condition is true
Either way: "Thank you!" the next line after the if: always runs
#include <iostream>
#include <string>
using namespace std;

int main() {
    int bill;
    cin >> bill;
    if (bill > 200) {
        cout << "Free chai!" << endl;
    }
    cout << "Thank you, visit again" << endl;
    return 0;
}
Input Output
250 Free chai! then Thank you, visit again
120 Thank you, visit again

With 120 the condition 120 > 200 is false, so the program jumps straight over the block. Same code, two different paths: your program made its first decision.

  • A condition is any expression that gives true or false: a comparison (bill > 200, age == 18), a bool variable, or several joined with && / ||.
  • A block is the code between { and }. Everything inside belongs to the if.
  • In C++, any number that isn't 0 also counts as true, and 0 counts as false. Remember that: it causes bug 1 below.

The other path: else

The ₹120 customer gets nothing: no chai and no message. She wants to know how much more to spend. Now there are two paths, exactly one of which runs. The second path is called else.

#include <iostream>
#include <string>
using namespace std;

int main() {
    int bill;
    cin >> bill;
    if (bill > 200) {
        cout << "Free chai!" << endl;
    } else {
        cout << "Add Rs " << 201 - bill << " more" << endl;
    }
    return 0;
}
Input Output Which block ran
120 Add Rs 81 more else
250 Free chai! if
200 Add Rs 1 more else: 200 is not greater than 200

Test the edge value, the number exactly on the line. "Over 200" is bill > 200; "200 or more" would be bill >= 200.

The shape:

if (condition) {
    // runs when condition is true
} else {
    // runs when condition is false
}
  • Exactly one of the two blocks runs, every time.
  • else is optional, and it never has its own condition.

Three silent bugs (no error, wrong answer)

Bug 1: = instead of ==

At the stall In C++
Write ₹500 on the bill: the bill changes bill = 500: assignment, puts 500 into bill
Ask "is the bill ₹500?": the bill stays the same bill == 500: comparison, gives true or false
#include <iostream>
#include <string>
using namespace std;

int main() {
    int bill;
    cin >> bill;
    if (bill = 500) {
        cout << "Free chai!" << endl;
    }
    cout << "Bill: " << bill << endl;
    return 0;
}

Input 120. Output:

Free chai!
Bill: 500

The single = wrote 500 into bill, and the value of the assignment (500) is not 0, so it counts as true. The customer's bill was silently changed. No error with the stage's command; with warnings on (-Wall), g++ says warning: suggest parentheses around assignment used as truth value [-Wparentheses].

Bug 2: a semicolon after if (...)

    if (bill > 200);
    {
        cout << "Free chai!" << endl;
    }

Input 120 prints Free chai!. The ; is an empty statement: it is the whole body of the if. The block below is just an ordinary block that always runs. With -Wall -Wextra: warning: suggest braces around empty body in an 'if' statement [-Wempty-body].

Bug 3: no braces, two lines

    if (bill > 200)
        cout << "Free chai!" << endl;
        cout << "Free samosa too!" << endl;
Input Output
120 Free samosa too!
250 Free chai! then Free samosa too!

Without braces, if controls only the next statement. The indentation lies: C++ ignores spaces. With -Wall: warning: this 'if' clause does not guard... [-Wmisleading-indentation]. Always use braces.

Many paths: else if

The metro fare depends on age: under 5 free, under 18 ₹10 (youth), under 60 ₹30, 60 and over ₹15 (senior). The obvious attempt is four separate ifs:

    int age;
    cin >> age;
    if (age < 5) cout << "Ticket: free" << endl;
    if (age < 18) cout << "Ticket: Rs 10 (youth)" << endl;
    if (age < 60) cout << "Ticket: Rs 30" << endl;
    if (age >= 60) cout << "Ticket: Rs 15 (senior)" << endl;

Input 3. Output: three tickets.

Ticket: free
Ticket: Rs 10 (youth)
Ticket: Rs 30

3 is under 5, but also under 18 and under 60. Each if is checked on its own. We need "stop at the first rule that matches": an else if ladder.

#include <iostream>
#include <string>
using namespace std;

int main() {
    int age;
    cin >> age;
    if (age < 5) {
        cout << "Ticket: free" << endl;
    } else if (age < 18) {
        cout << "Ticket: Rs 10 (youth)" << endl;
    } else if (age < 60) {
        cout << "Ticket: Rs 30" << endl;
    } else {
        cout << "Ticket: Rs 15 (senior)" << endl;
    }
    return 0;
}
Input Output
3 Ticket: free
12 Ticket: Rs 10 (youth)
35 Ticket: Rs 30
70 Ticket: Rs 15 (senior)

C++ checks the conditions from the top, runs the first block whose condition is true, and skips all the rest. The final else catches everything else.

Order matters: the mango sorter

A mango-sorting tray has holes from small to big. Each mango drops through the first hole it fits and never reaches the others; mangoes too big for every hole land in the basket at the end (else). Put the biggest hole first and every mango drops into it:

    if (age < 60) {
        cout << "Ticket: Rs 30" << endl;
    } else if (age < 18) {
        cout << "Ticket: Rs 10 (youth)" << endl;
    } else if (age < 5) {
        cout << "Ticket: free" << endl;
    } else {
        cout << "Ticket: Rs 15 (senior)" << endl;
    }

Input 3 prints Ticket: Rs 30 (and so does 12). The youth and free branches can never run. Put the narrowest condition first.

Combining conditions: &&, || and nested if

Weekend offer: 10% off on Saturday (day 6) or Sunday (day 7), but only if the bill is over ₹100.

#include <iostream>
#include <string>
using namespace std;

int main() {
    int day, bill;
    cin >> day >> bill;
    if ((day == 6 || day == 7) && bill > 100) {
        cout << "Weekend offer: 10% off" << endl;
    } else {
        cout << "No offer today" << endl;
    }
    return 0;
}
Input Output Why
6 250 Weekend offer: 10% off both parts true
7 80 No offer today the bill part is false; && needs both
3 250 No offer today the day part is false

The brackets around the || part matter: && is evaluated before || (like × before +), so without them day == 6 || day == 7 && bill > 100 would give the offer to every Saturday bill.

A nested if is an if inside another if's block: a second question asked only after the first says yes. The metro's student fare is only for adults:

    int age;
    bool student;
    cin >> age >> student;
    if (age >= 18) {
        if (student) {
            cout << "Rs 20 (student)" << endl;
        } else {
            cout << "Rs 30" << endl;
        }
    } else {
        cout << "Rs 10 (youth)" << endl;
    }
Input Output
20 1 Rs 20 (student)
20 0 Rs 30
15 1 Rs 10 (youth) (the inner question is never asked)

(cin >> student reads 1 as true and 0 as false.) Keep nesting shallow: more than two levels gets hard to read; an else if ladder or && is often clearer.

Catching bad input: if (cin.fail())

In episode 4 a friend typed abc for the bill: cin put 0 in the box and raised its fail flag. Now you can check the flag:

#include <iostream>
#include <string>
using namespace std;

int main() {
    int bill;
    cin >> bill;
    if (cin.fail()) {
        cout << "Please type a number." << endl;
        return 1;
    }
    cout << "Each of 4 pays: " << bill / 4.0 << endl;
    return 0;
}
Input Output Exit code
abc Please type a number. 1
480 Each of 4 pays: 120 0

return 1; inside main ends the program immediately. The number is the exit code: 0 means "finished fine", anything else means "something went wrong" (scripts and other programs can read it). Checking input before using it is called input validation.

One-line choice: the ternary operator ?:

When the decision just picks one of two values, use condition ? valueIfTrue : valueIfFalse:

    int bill;
    cin >> bill;
    string msg = (bill > 200) ? "Free chai!" : "No chai";
    cout << msg << endl;

Input 250 prints Free chai!; input 90 prints No chai. Read it as "is the bill over 200? if yes this, else that". It's called ternary because it takes three parts. Use it only for picking a value; for anything bigger, use if / else.

The canteen menu: 1 dosa, 2 idli, 3 vada, 4 chai. With else if that's choice == 1, choice == 2, choice == 3... the same question again and again. Like a lift, where you press 3 and it goes straight to floor 3, switch jumps straight to the matching option:

#include <iostream>
#include <string>
using namespace std;

int main() {
    int choice;
    cin >> choice;
    switch (choice) {
        case 1: cout << "Masala dosa: Rs 60" << endl; break;
        case 2: cout << "Idli: Rs 40" << endl; break;
        case 3: cout << "Vada: Rs 30" << endl; break;
        case 4: cout << "Chai: Rs 15" << endl; break;
        default: cout << "Not on the menu" << endl;
    }
    return 0;
}
Input Output
2 Idli: Rs 40
9 Not on the menu
  • switch (value) compares one value against fixed options.
  • case 2: is one option (a label). The value after case must be a constant: a number or a character literal.
  • break; jumps out of the switch.
  • default: runs when no case matches, like a final else. It's optional.

Forgetting break: fall-through

Delete every break and order an idli (input 2):

Idli: Rs 40
Vada: Rs 30
Chai: Rs 15
Not on the menu

switch jumped to case 2 and, with no break, kept running every line below it: this is fall-through, like a lift with broken brakes. With -Wextra, g++ warns: warning: this statement may fall through [-Wimplicit-fallthrough=].

Fall-through can be useful when several cases share one block:

    char grade;
    cin >> grade;
    switch (grade) {
        case 'A':
        case 'B': cout << "Well done!" << endl; break;
        case 'C': cout << "Passed" << endl; break;
        default: cout << "Work harder" << endl;
    }
Input Output
A Well done! (falls into case 'B')
B Well done!
C Passed
F Work harder

When a case has code and you fall through on purpose, write a comment (or C++17's [[fallthrough]];) so readers know it isn't a forgotten break.

switch or else if?

Use switch when... Use else if when...
one value is compared against fixed options (menu numbers, letter grades) you test ranges (age < 18)
the value is an integer type: int, char, long, bool, an enum conditions use AND, OR or several variables
you only need equality the value is a string or double

switch on a string:

    string item;
    cin >> item;
    switch (item) {
        case "chai": cout << "Rs 15" << endl; break;
    }
main.cpp: In function 'int main()':
main.cpp:8:13: error: switch quantity not an integer
    8 |     switch (item) {
      |             ^~~~

The value in switch's brackets (its "quantity") must be an integer type. For text, use if (item == "chai") ... else if ....

Common mistakes (and the real g++ messages)

Mistake Code What g++ says / what happens Fix
= instead of == if (bill = 500) no error; bill becomes 500 and the condition is true. With -Wall: suggest parentheses around assignment used as truth value if (bill == 500)
; after if (...) if (bill > 200); { ... } no error; the block always runs remove the ;
Missing braces if (x) + two indented lines no error; only the first line is guarded always use { }
Missing braces before else if (x) a; b; else c; error: 'else' without a previous 'if' if (x) { a; b; } else { c; }
Wrong ladder order if (age < 60) ... else if (age < 18) no error; the later branches never run narrowest condition first
a < x < b if (18 <= age <= 25) no error; always true (see episode 3) if (age >= 18 && age <= 25)
Forgotten break case 2: ...; with no break no error; runs every case below (fall-through) break; after each case
switch on a string switch (item) error: switch quantity not an integer use if / else if
Off-by-one at the edge bill > 200 when you meant "200 or more" no error; 200 takes the else path bill >= 200; test the edge value

The else error, live:

    int bill;
    cin >> bill;
    if (bill > 200)
        cout << "Free chai!" << endl;
        cout << "Free samosa too!" << endl;
    else
        cout << "No offer" << endl;
main.cpp: In function 'int main()':
main.cpp:11:5: error: 'else' without a previous 'if'
   11 |     else
      |     ^~~~

The if owned only the Free chai! line; the samosa line ended it, so the else has nothing to attach to. With braces (if (bill > 200) { ... } else { ... }), input 120 prints No offer.

Mini project: canteen order

Read an item number and a quantity. A switch sets the price (1 dosa ₹60, 2 idli ₹40, 3 chai ₹15). Validate everything, print the total, and give free chai over ₹200 with the ternary operator.

#include <iostream>
using namespace std;
int main() {
    int item, qty, price = 0;
    cin >> item >> qty;
    switch (item) {
        case 1: price = 60; break;  // dosa
        case 2: price = 40; break;  // idli
        case 3: price = 15; break;  // chai
    }
    if (cin.fail() || price == 0 || qty <= 0) {
        cout << "Invalid order" << endl;
        return 1;
    }
    int total = price * qty;
    cout << "Total: Rs " << total << endl;
    cout << (total > 200 ? "Free chai!" : "No gift") << endl;
    return 0;
}
Input Output
1 4 Total: Rs 240 then Free chai!
2 3 Total: Rs 120 then No gift
9 1 Invalid order (no case matched, price stayed 0)
1 abc Invalid order (cin.fail())
3 0 Invalid order (quantity not positive)

Notice the trick: price starts at 0 and only a valid item changes it, so price == 0 means "not on the menu". Extend it: add vada as item 4 (₹30), and a weekend 10% discount.

Practice

  1. Read a number and print whether it is even or odd.
  2. Read marks (0–100) and print the grade: A (80+), B (60+), C (33+) or Fail. Reject marks outside 0–100.
  3. Read a year and print whether it is a leap year (divisible by 4 but not by 100, or divisible by 400).
  4. A calculator: read a op b (for example 7 / 2) and use switch on the operator character. Don't divide by zero.
Solution

1. n % 2 is the remainder after dividing by 2. Input 7 prints 7 is odd; 10 prints 10 is even.

#include <iostream>
using namespace std;

int main() {
    int n;
    cin >> n;
    if (n % 2 == 0) {
        cout << n << " is even" << endl;
    } else {
        cout << n << " is odd" << endl;
    }
    return 0;
}

2. Validate first, then a ladder from the highest grade down. 85 → Grade A, 65 → Grade B, 40 → Grade C, 20 → Fail, 150 → Invalid marks.

#include <iostream>
using namespace std;

int main() {
    int marks;
    cin >> marks;
    if (cin.fail() || marks < 0 || marks > 100) {
        cout << "Invalid marks" << endl;
        return 1;
    }
    if (marks >= 80) {
        cout << "Grade A" << endl;
    } else if (marks >= 60) {
        cout << "Grade B" << endl;
    } else if (marks >= 33) {
        cout << "Grade C" << endl;
    } else {
        cout << "Fail" << endl;
    }
    return 0;
}

3. 2024 → 2024 is a leap year, 1900 → 1900 is not a leap year, 2000 → 2000 is a leap year, 2026 → 2026 is not a leap year.

#include <iostream>
using namespace std;

int main() {
    int year;
    cin >> year;
    if ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0) {
        cout << year << " is a leap year" << endl;
    } else {
        cout << year << " is not a leap year" << endl;
    }
    return 0;
}

4. cin >> a >> op >> b reads 7, then the character /, then 2. 7 / 2 → 3.5, 6 * 4 → 24, 5 / 0 → Cannot divide by zero, 3 x 4 → Unknown operator.

#include <iostream>
using namespace std;

int main() {
    double a, b;
    char op;
    cin >> a >> op >> b;
    switch (op) {
        case '+': cout << a + b << endl; break;
        case '-': cout << a - b << endl; break;
        case '*': cout << a * b << endl; break;
        case '/':
            if (b == 0) {
                cout << "Cannot divide by zero" << endl;
            } else {
                cout << a / b << endl;
            }
            break;
        default: cout << "Unknown operator" << endl;
    }
    return 0;
}

Quick quiz

What does this print?

int x = 5;
if (x = 0)
    cout << "A" << endl;
else
    cout << "B" << endl;
  • A. A
  • B. B
  • C. A and B
  • D. Compile error
Answer

B. x = 0 is an assignment, not a comparison: it puts 0 into x, and the value 0 counts as false, so the else runs (verified). With x == 0 it would also print B, but for a different reason: 5 is not 0.

Interview questions

  • What is the difference between = and ==? = assigns (stores a value and gives that value back); == compares and gives true/false. if (x = 0) is legal C++ and always false; if (x = 5) is always true.
  • What does if (x) mean when x is an int? It's true when x is non-zero and false when it is 0. Pointers, chars and doubles convert the same way.
  • What is the difference between a chain of separate ifs and an else if ladder? Separate ifs are each checked, so several can run; in a ladder at most one block runs, the first whose condition is true.
  • What is fall-through in a switch? Without break, execution continues into the following cases' code. It's useful for sharing code between cases (case 'A': case 'B':), and C++17 adds [[fallthrough]]; to mark it as intentional.
  • Which types can a switch take? Integral and enumeration types (int, char, long, bool, enum), or class types that convert to one. Not string or double; case labels must be compile-time constants.
  • When would you choose switch over else if? When one integral value is compared for equality against several constants: it reads better and the compiler can turn it into a jump table.
  • What does the ternary operator return? A value: c ? a : b evaluates c, then exactly one of a or b. Both branches must have compatible types.
  • What does return 1; in main do? Ends the program and reports exit code 1 to whoever started it; non-zero conventionally signals failure.

Glossary

Term Plain meaning Example
Decision Running some code only when something is true free chai only over ₹200
Condition An expression that is true or false bill > 200
bool The type with just two values, true and false bool student = true;
if Runs a block only when its condition is true if (bill > 200) { ... }
Block The statements between { and }, treated as one unit { cout << "Free chai!"; }
else The block that runs when the if's condition is false } else { ... }
Edge value The input exactly on the boundary of a condition 200 for bill > 200
Assignment = Stores a value in a variable bill = 500;
Comparison == Asks whether two values are equal (true/false) bill == 500
Empty statement A lone ; that does nothing if (x);
Silent bug A mistake that compiles and runs but gives a wrong result if (bill = 500)
Warning A message from the compiler about suspicious code; the program is still built -Wparentheses
-Wall g++ option that turns on the common warnings g++ -Wall main.cpp
Indentation Spaces at the start of a line, for humans only; C++ ignores them the lying samosa line
else if ladder A chain of conditions where the first true one wins metro fares
Logical AND (&&) True only if both sides are true day == 6 && bill > 100
Logical OR (two bars) True if at least one side is true Saturday or Sunday: day 6 or day 7
Precedence Which operator is applied first AND is applied before OR
Nested if An if inside another if's block the student fare for adults
cin.fail() True when the last read failed (e.g. letters for an int) input abc
Input validation Checking input is sensible before using it if (cin.fail()) { return 1; }
return (in main) Ends the program immediately return 1;
Exit code The number a program reports when it ends: 0 fine, non-zero error return 1; → 1
Ternary operator ?: Picks one of two values based on a condition bill > 200 ? "Free chai!" : "No chai"
switch Jumps to the case that matches one value switch (choice) { ... }
case One labelled option inside a switch case 2:
break Jumps out of the switch case 1: ...; break;
default The switch option used when no case matches default: cout << "Not on the menu";
Fall-through Running on into the next case because there was no break idli order prints four items
Integer type A whole-number type: int, char, long, bool what switch needs
char literal One character in single quotes 'A', '+'
Remainder % What's left after whole-number division 7 % 2 is 1
Compile error A mistake g++ finds before the program runs; no program is produced 'else' without a previous 'if'

Summary

  • Without decisions, every line always runs. if (condition) { ... } runs a block only when the condition is true.
  • else is the other path: exactly one of the two blocks runs. Test the edge value.
  • Three silent bugs: = instead of ==; a ; after if (...); missing braces (only one line is guarded). Always use braces; turn on -Wall to catch them.
  • Separate ifs can all run; in an else if ladder the first match wins, so put the narrowest condition first.
  • && needs both, || needs one; put brackets around the || part. A nested if asks a second question inside the first.
  • if (cin.fail()) { ...; return 1; } is input validation: check before you use.
  • c ? a : b picks one of two values.
  • switch compares one integer value against fixed cases; break after each case, default for the rest. No break means fall-through. No switch on strings: switch quantity not an integer.

Next episode: loops. Raju's hostel friend needs to print 100 meal coupons, and nobody wants to write 100 cout lines. Your program learns to repeat, with while, for and do-while.